How to Use Lens Wiping Airlaid Paper?

You know, after long-term use of cameras and microscopes, dust will accumulate on the lenses. Lens wiping airlaid paper can help remove dust on the lens. As a professional Optical Cleaning Airlaid Paper Manufacturer, we have had wholesale lens wiping airlaid paper for years. Here we would like to show the the procedure about how to use lens wiping airlaid paper properly.

Lens wiping airlaid paper is suitable for dust and oil on the surface of camera and microscope lenses, spectacle lenses and other optical systems. Lens cleaning paper has two sides, one is smooth and the other is slightly rough. When using lens cleaning paper to wipe the lens or lens surface, do not use the smooth side or the rough side.

When wiping the lens and lens, take out a piece of lens cleaning paper. The lens cleaning paper is very thin. Do not use the lens cleaning paper to wipe the lens or lens directly. You can first fold the lens cleaning paper in half along the long axis, and then fold it in half along the short axis. one time. Then roll the lens tissue into a small tube.

Tear off part of the small tube made of lens cleaning paper, so that the lower part of the small tube becomes a burr. You can use this burr to clean the lens. When using lens cleaning paper to wipe the lens or lens, it is best to start wiping from the center of the lens and wipe outward in circles to wipe off the dust on the surface of the lens or lens.

Since the burrs of the lens paper have a lot of fibers, after wiping the lens or lens, some fine fibers are likely to remain on the lens. At this time, you can blow the lens against a fan to blow off the fibers. That's it.

When using a microscope to observe bacteria and other microorganisms, if you can't find the object, the lens may be dirty. At this time, you can use lens cleaning paper dipped in a small amount of xylene to wipe the lens of the microscope. After the lens is wiped clean, then adjust the brightness of the microscope and the distance from the glass slide to see the object image.

When the lens of a camera or microscope is accidentally contaminated with oil, it is best not to use lens cleaning paper to wipe it, because the ability of lens cleaning paper to remove oil is not strong. If you use lens cleaning paper to wipe the lens repeatedly, it will easily scratch the lens.

For oil stains on the camera or microscope lens, you can use LCD screen cleaner. Before wiping, spray the cleaner on the lens cloth, and then wipe the oil stains on the lens several times. When the lens is stained with oil, it is best not to use alcohol to wipe it, otherwise it will damage the lens. If there is oil stains on the lens barrel, it is best to find a professional maintenance department to disassemble and repair it.